> Settings
|
43
LINKS
AM/FM radio
Tuning into a Radio Station
■
Tuning Automatically
1. Press TUNER on the remote controller several times to
select either "AM" or "FM".
2. Press MODE on the remote controller so that
"TunMode:Auto" appears on the display.
3. Press the cursors / on the remote controller to start
automatic tuning.
•
Searching automatically stops when a station is
found. When tuned into a radio station, the "TUNED"
indicator on the display lights. When tuned into an
FM radio station, the "FM ST" indicator lights.
•
No sound is output while the "TUNED" indicator is
off.
When FM broadcasts reception is poor
:
Radio waves may be weak depending on the building
structure and environmental conditions. In that case,
perform the procedure as explained below in "Tuning
Manually" to manually select the desired station.
■
Tuning Manually
1. Press TUNER on the remote controller several times to
select either "AM" or "FM".
2. Press MODE on the remote controller so that
"TunMode:Manual" appears on the display.
3. While pressing the cursors / on the remote
controller, select the desired radio station.
•
The frequency changes by 1 step each time
you press the button. The frequency changes
continuously if the button is held down and stops
when the button is released. Tune by looking at the
display.
To return to the auto tuning mode
:
Press MODE on the remote controller again so that
"TunMode:Auto" appears on the display. The unit tunes
automatically into a radio station.
Presetting a Radio Station
It allows you to register up to 40 of your favorite AM/FM
radio stations. Registering radio stations in advance allows
you to tune into your radio station of choice directly.
■
Registration Procedure
1. Tune into the AM/FM radio station you want to register.
2. Press MEMORY on the remote controller so that the
preset number on the display flashes.
3. While the preset number is flashing (about 8 seconds),
repeatedly press / on the remote controller to select
a number between 1 and 40.
4. Press MEMORY on the remote controller again to
register the station.
•
When the station is registered, the preset number
stops flashing.
•
Repeat this procedure for all of your favorite AM/FM
radio stations.
■
Selecting a Preset Radio Station
1. Press TUNER on the remote controller.
2. Press / on the remote controller to select a preset
number.
■
Deleting a Preset Radio Station
1. Press TUNER on the remote controller.
2. Press / on the remote controller to select the preset
number to delete.
3. After pressing MEMORY on the remote controller, press
CLEAR while the preset number is flashing to delete the
preset number.
•
When deleted, the number on the display goes off.
