background image

23

Before Start

Part Names

Install

Initial Setup

Playback

Supplementary Information Advanced Setup Others

E

N

Spotify

Wi-Fi

Onkyo TX-L50 XXXX

b

d

e

c

a

1

2

3

4

Basic operations

Spotify Connect play is possible by connecting this unit to 
the same network as a smart phone or tablet. To enable 
Spotify Connect, install the Spotify application on your 
smartphone or tablet and create a Spotify premium account.
1. Connect the smartphone to the network that this unit is 

connected to.

2. Click the Connect icon in the track play screen of the 

Spotify app.

3. Select this unit.
4. This unit turns on automatically and the input selector 

changes to NET and streaming of Spotify starts.

0

If "5. Hardware" - "Power Management" - "Network 
Standby" is set to "Off" in the Setup menu, manually turn 
the unit on and then press NET on the remote controller.

0

Refer to the following for Spotify settings: 
www.spotify.com/connect/

0

The Spotify software is subject to third party licenses 
found here: 
www.spotify.com/connect/third-party-licenses

The following remote controller operations are also 
possible.
(a) Pressed during play, this button changes the displayed 

track information.

(b) This button plays the previous track.
(c) This button lets you start repeat or random playback. 

Pressing this button repeatedly cycles through the 
repeat modes.

(d) Pressed during play this button pauses playback. 

Pressed while paused, and it restarts play.

(e) This button plays the next track.

Summary of Contents for TX-L50


















































































Reviews: