18
> Install
> Playback
Supplementary Information | Advanced Setup | Others
E
N
Initial Setup
Initial Setup with Auto Start-up Wizard
1
3
4
2
TV's remote controller
Initial Setup starts automatically
1. Switch the input on the TV to that assigned to the unit.
2. Put batteries into the remote controller of this unit.
3. Press
Í
on the remote controller. When power is turn on
for the first time, an Initial Setup screen is automatically
displayed on the TV to allow you to make settings
required for start up.
4. Follow the on-screen instructions to select the item with
the cursors of the remote controller and press ENTER to
confirm your selection.
0
To return to the previous screen, press
.
To redo Initial Setup:
If you terminate the procedure on the
way or want to change a setting made during Initial Setup,
press
on the remote controller, select "6. Miscellaneous"
- "Initial Setup" in the Setup menu and press ENTER. To
select the language displayed again, change "OSD
Language". (
Exit
Initial Setup
Language Select
English
Deutsch
Français
Español
Italiano
Nederlands
Svenska
Русский
язык
中文
