En-
34
Firmware Update
To update the firmware of the tuner, you can choose
from the following two methods: update via network, or
update via USB storage. Choose the one that best suits
your environment. Before proceeding with the update,
please read the corresponding explanations carefully.
■
Update via network
You need a wired Internet connection to update the
firmware.
■
Update via USB storage (
page 35)
Please prepare a USB storage device such as a USB flash
memory stick. You need at least 32 MB of available
space to update the firmware.
Notes:
• Check the network connection before updating.
• Do not touch the any cable or device connected to the
tuner during the updating process.
• Do not attempt to access the tuner from your PC while
it is being updated.
• Do not shutdown the power of the tuner while it is
being updated.
• The storage media in the USB card reader may not work.
• If the USB device is partitioned, each section will be
treated as an independent device.
• If the USB device contains a lot of data, the tuner may
take a while to read it.
• Operation is not guaranteed for all USB devices,
which includes the ability to power them.
• Onkyo takes no responsibility whatsoever for the loss
or damage of data resulting from the use of a USB
device with the tuner. Onkyo recommends that you
back up your important music files beforehand.
• If you connect a USB hard disk drive to the USB port,
Onkyo recommends that you use its AC adapter to
power it.
• USB hubs and USB devices with hub functions are not
supported. Do not connect your USB device via a
USB hub.
• USB devices with security functions are not supported.
See the Onkyo web site for latest information.
The tuner allows you to update the firmware using the
network connection on the rear panel.
Notes:
• Make sure your tuner is turned on and an Ethernet
cable is connected to the rear panel of the tuner.
• Never unplug or turn off the tuner while it is being
updated.
• Never plug or unplug an Ethernet cable during the
update process.
• Do not attempt to access the tuner from your PC while
it is being updated.
• Never unplug the power cord during the update process.
• It takes about 5 to 30 minutes to complete the
firmware update. (The unit displays the approximate
time duration required for the update.)
• The tuner will retain all your settings after the update
is finished.
Before you start
• Turn off the controller device connected via Ethernet
cable.
• Stop playback of contents from Internet Radio, iPod/
iPhone, USB or servers, etc.
Update procedure
1
Press the [SETUP] button on the remote
controller.
The Setup menu will be displayed on the tuner’s
display.
2
Use [
] or [
] button to select “3. Firmware
Update” and press [ENTER].
The current firmware version will be displayed.
3
Use [
] or [
] button to select “Via NET”
and press [ENTER].
4
“Update” is displayed. Press [ENTER].
The update process will begin. During the update
process, you can still view the update progress on
the tuner’s display.
5
The message “Completed!” appears on the
tuner’s display, indicating that the update
has been completed.
6
Turn off the tuner using [
ON/STANDBY]
on the front panel.
Do not use [
] on the remote controller.
Once turned off, the tuner will automatically turn
on again.
Congratulations! You now have the latest firmware
installed on your Onkyo tuner.
Limitation of liability
The program and accompanying online documentation
are furnished to you for use at your own risk. Onkyo
will not be liable and you will have no remedy for
damages for any claim of any kind whatsoever
concerning your use of the program or the
accompanying online documentation, regardless of
legal theory, and whether arising in tort or contract. In
no event will Onkyo be liable to you or any third party
for any special, indirect, incidental, or consequential
damages of any kind, including, but not limited to,
compensation, reimbursement or damages on account
of the loss of present or prospective profits, loss of
data, or for any other reason whatsoever.
Updating the Firmware via Network
