background image

3

Befor

e Using

Connections

Other Information

Operations

1.

Read Instructions –

 All the safety and

operating instructions should be read before
the appliance is operated.

2.

Retain Instructions – 

The safety and

operating instructions should be retained for
future reference.

3.

Heed Warnings –

 All warnings on the

appliance and in the operating instructions
should be adhered to.

4.

Follow Instructions –

 All operating and use

instructions should be followed.

5.

Water and Moisture – 

The appliance should

not be used near water – for example, near a
bathtub, washbowl, kitchen sink, laundry tub,
in a wet basement, or near a swimming pool,
and the like.

6.

Carts and Stands – 

The appliance should be

used only with a cart or stand that is
recommended by the manufacturer.

6A. An appliance and cart

combination should be
moved with care. Quick
stops, excessive force, and
uneven surfaces may cause
the appliance and cart
combination to overturn.

7.

Wall or Ceiling Mounting –

 The appliance

should be mounted to a wall or ceiling only
as recommended by the manufacturer.

8.

Ventilation –

 The appliance should be

situated so that its location or position does
not interfere with its proper ventilation. For
example, the appliance should not be situated
on a bed, sofa, rug, or similar surface that
may block the ventilation openings; or if
placed in a built-in installation, such as a
bookcase or cabinet that may impede the flow
of air through the ventilation openings, there
should be free space of at least 5 cm (2 in.)
and an opening behind the appliance.

9.

Heat –

 The appliance should be situated away

from heat sources such as radiators, heat
registers, stoves, or other appliances (including
amplifiers) that produce heat.

10.

Power Sources –␣

The appliance should be

connected to a power supply only of the type
described in the operating instructions or as
marked on the appliance.

11.

Polarization –

 If the appliance is provided with a

polarized plug having one blade wider than the
other, please read the following information:
The polarization of the plug is a safety feature.
The polarized plug will only fit the outlet one
way. If the plug does not fit fully into the outlet,
try reversing it. If there is still trouble, the user
should seek the services of a qualified electrician.
Under no circumstances should the user attempt
to defeat the polarization of the plug.

12.

Power-Cord Protection –

 Power-supply

cords should be routed so that they are not
likely to be walked on or pinched by items
placed upon or against them, especially near
plugs, convenience receptacles, and the point
where they exit from the appliance.

13.

Cleaning –

 The appliance should be cleaned

only as recommended by the manufacturer.

14.

Nonuse Periods –

 The power cord of the

appliance should be unplugged from the outlet
when left unused for a long period of time.

15.

Object and Liquid Entry –

 Care should be taken

so that objects do not fall and liquids are not spilled
into the enclosure through openings.

16.

Damage Requiring Service –

 The appliance

should be serviced by qualified service
personnel when:
A. The power-supply cord or the plug has

been damaged; or

B. Objects have fallen, or liquid has been

spilled into the appliance; or

C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate

normally or exhibits a marked change in
performance; or

E. The appliance has been dropped, or the

enclosure damaged.

17.

Servicing –

 The user should not attempt to

service the appliance beyond that described in
the operating instructions. All other servicing
should be referred to qualified service personnel.

PORTABLE CART WARNING

S3125A

Important Safeguards

Summary of Contents for MD-105TX





















































Reviews: