Onkyo HT-RC470, Instruction Manual

Page: 47 / 144

Advanced Operations
En-47
Audyssey ®
■
Audyssey
See “Audyssey” in “Source Setup” (
➔
page 57
).
■
Dynamic EQ
See “Dynamic EQ” in “Source Setup” (
➔
page 57 ).
■
Dynamic Volume
See “Dynamic Volume” in “Source Setup” (
➔
page 57
).
Note
• These technologies can be used when all the following conditions
are met:
– Room Correction and Speaker Setup is completed. Note that
“ Audyssey ” requires the “ Audyssey 2EQ Full Calibration ”
method.
– Any listening mode other than Direct is selected.
– A pair of headphones is not connected.
• The setting is stored individually for each input selector.
• “
Dynamic EQ ” and “ Dynamic Volume ” cannot be selected
when any of the THX listening modes is selected, with
“
Loudness Plus ” set to “ On ” or “ Preserve THX Settings ” set to
“ Yes ” (
➔
page 54 ).
Late Night
■
Late Night
For Dolby Digital and Dolby Digital Plus sources, the
options are:
`
Off
`
Low :
Small reduction in dynamic range.
`
High :
Large reduction in dynamic range.
For Dolby TrueHD sources, the options are:
`
Auto :
The Late Night function is set to “ On ” or “ Off ”
automatically.
`
Off
`
On
Turn this setting on to reduce the dynamic range of Dolby
Digital material so that you can still hear quiet parts even
when listening at low volume levels—ideal for watching
movies late at night when you don’t want to disturb
anyone.
Note
• The effect of the Late Night function depends on the material that
you are playing and the intention of the original sound designer,
and with some material there will be little or no effect when you
select the different options.
• The Late Night function can be used only when the input source
is Dolby Digital, Dolby Digital Plus, or Dolby TrueHD.
• The Late Night function is set to “ Off ” when the AV receiver is
set to standby. For Dolby TrueHD sources, it will be set to
“
Auto ”.
• With Dolby TrueHD sources, the Late Night function cannot be
used when “ TrueHD Loudness Management ” is set to “ Off ”
(
➔
page 56 ).
Music Optimizer
■
Music Optimizer
`
Off
`
On
The Music Optimizer function enhances the sound quality
of compressed music files. When set to “
On ”, the M.Opt
indicator lights on the AV receiver’s display, and the
MUSIC OPTIMIZER indicator lights on the front panel.
Tip
• Alternatively, you can use MUSIC OPTIMIZER on the AV
receiver.
Note
• The Music Optimizer function only works with PCM digital
audio input signals with a sampling rate below 48 kHz and analog
audio input signals.
• The Music Optimizer is disabled when the Direct listening mode
is selected.
• The setting is stored individually for each input selector.
Re-EQ
With the Re-EQ function, you can compensate a
soundtrack whose high-frequency content is too harsh,
making it more suitable for home theater viewing.
■
Re-EQ
`
Off
`
On
This function can be used with the following listening
modes: Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
Multichannel, DTS, DTS-HD High Resolution Audio,
DTS-HD Master Audio, DTS Express, DSD, Dolby EX,
Dolby Pro Logic IIz Height, Dolby PLIIx Movie, DTS
Neo:6 Cinema and 5.1-channel Neo:6.
■
Re-EQ(THX)
`
Off
`
On
This function can be used with the following listening
modes: THX Cinema, THX Surround EX, and
THX Select2 Cinema.
Note
• These settings are stored individually for each input selector. In
THX listening mode however, the setting will return to “ On ”
when the AV receiver is turned off.
• These settings cannot be used while a pair of headphones is
connected.