D
V-SP55
DISASSEMBLY DVD MECHANISM-1
1. Remove the side panel by 4 screws and top cover by six screws.
Top cover
How to open the Tray when the power cannot be on
Slit
Drive Gear
Loading Mecha.Assy
Screwdriver (small)
Screwdriver (small)
Projection
Insert a screwdriver (small) into the slit located
at the bottom of the unit, and slide the
projection of the Drive Gear in the Loading
Mecha. Assy in the direction of the arrow, as
1. Remove three screws (Black 3TT+8B(BC) from bottom side. Remove the front panel.
2. Remove two screws on front bracket. And release the FFC (P71).
3. Remove two screws on the power switch PC board and wire holder.
4. Remove four screw (3SMS8W.SW+14B(BC)) from DVD mechanism.
5. Soldering the short lands. It is required because of static electricity protection.
6. Remove sex FFCs and one connector assy.
7. Remove the DVD mechanism assembly.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299