DV-SP504
SETTING FW
NOTE: This work does before TEST MODE
Prepared Special remote controller (RC-484M)
1. Setting firmware
1-1. Turn on power switch and display "No Disc" on the FL tube.
1-2. Press "
DVD
" key and "
2
" key at the same time.
1-3. Press "
RETURN
" key.
Display "REGION MODE" on the FL tube.
1-4. Press figure key (Example: 1=U.S.A.) , and display "REGION01" on the FL tube.
MDD1N: "
1
"
MUP2P: "
2
"
MUT3P: "
3
"
MUK3N: "
3
"
MUA4P: "
4
"
1
2
3
RC-484M
Part No. 24140484
4
2. How to FW rewite
2-1. The following FW file and file with about 40M (WAVW or MP3 etc) are written.
2-2. Write it Disc at Once.
2-3. DISC that has already been written is put on tray and close the tray.
2-4. Disc is loaded, display is "Firmware Upgrade Erase and program start cancel"
on the TV monitor.
2-5. Select "Start" and press "ENTER" key. Starting upload.
2-6. When the tray opens, DISC is taken out.
NOTE: Do not pull out the AC cord.
Initialize it after changing of writing.
