Onkyo DV DV-SP405, Service Manual

Page: 84 / 92

IMAGINATIVE SIGHT & SOUND
R
Confirm the Regional code and Firmware version.
1. Connect the TV monitor to the DV-SP405.
2. Turn ON the standby switch ON. (No Disc)
3. Press "SET UP" key of remote controller (RC-574DV).
Appear a HOME MENU. (Photo-1)
4. Select "
Initial Settings " menu and press " ENTER ".
5. Select " Options " menu, and press the " DISPLAY " button.
6. Appear regional code and firmware ROM number.
Confirm the regional cord and firmware version.
When close the menu, press "RETURN" button of
the unit.
Make advanced settings
Move Select
ENTER ENTER
Exit
HOME MENU
HOME MENU
DVD
Video Adjust Audio Settings
Initial Settings
Play Mode
Setup Navigator
Disc Navigator
Initial Settings
Parental Lock Off(us)
REGION 2
ROM VERSION : 1.508
Move Select
ENTER
Exit HOME MENU
(Photo-1)
(Photo-2)
(Photo-2)
Digital Audio OUT
Video Output
Language
Display
Options
Down load the firmware
1. Newest FW is written in CD-R with a
personal computer.
2. Prees "
Standby " button and " Disc Tray " button .
3. Set the CD-R on the Disc tray and press " Play " button.
Waiting 2 seconds and open the tray automatically.
DISC TRAY waits for about 2 minutes in
the tray open condition.
Cautions: Do not close the disc tray.
Do not pull out AC cord.
Close the tray automatically.
4. Press "Standby" button. (Off)
5. Press "Standby" button (On).
Confirm the regional code and firmware version at above method.
Writing CD-R or CD-RW of upgraded FW.
1. Download the newest firmware.
ex: xxxx****.BIN
2. Volume label name is "PIONEER"
PIONEER
Firmware data
xxxx****.BIN
Volume label
DV-SP405
FIRMWARE DOWN LOADING
Regional code
ROM Version