![background image](http://html1.mh-extra.com/html/onkyo/dv-dv-sp405/dv-dv-sp405_service-manual_1636886008.webp)
DV-SP405
REMOVAL OF DVD MECHA. PARTS-3
Holder Traverse
Insulator (F)
Traverse Ass'y
Insulator (F)
Insulator (R)
NOTE
1. In case of the Clamper Ass'y installation, install correctly
as Fig. 2-5-B.
Fig. 2-5-B
Plate Clamper
Clamper
2-6: HOLDER TRAVERSE/INSULATOR (F)/INSULATOR
(R) (Refer to Fig. 2-6-A)
1. Remove the Holder Traverse.
2. Remove the 2 Insulator (F).
3. Remove the Insulator (R).
Fig. 2-6-A
NOTE
1. In case of the Insulator (F) installation, install correctly
as Fig. 2-6-B.
Fig. 2-6-B
Traverse Holder
Insulator (F)
2-7: SWITCH PCB ASS'Y/GEAR MIDDLE/GEAR FEED/
RACK FEED ASS'Y/FEED MOTOR
(Refer to Fig. 2-7-A)
1. Unlock the support
2. Remove the Gear Middle.
3. Remove the screw
4. Remove the Rack Feed Ass'y.
5. Remove the screw
6. Remove the Switch PCB Ass'y.
7. Remove the screw
8. Remove the Gear Feed.
9. Remove the 2 screws
10. Remove the Feed Motor.
11. Remove the Gear Motor.
Gear Middle
Gear Motor
Feed Motor
• Screw Torque: 1.3 +/- 0.3kgf•cm (Screw )
• Screw Torque: 3.0 +/- 0.3kgf•cm (Screw )
• Screw Torque: 1.0 +/- 0.3kgf•cm (Screw )
Switch PCB Ass'y
Rack Feed Ass'y
Gear Feed
Fig. 2-7-A
Traverse Ass'y
NOTE
1. When installing the Rack Feed Ass'y, push both ends to
align the teeth as shown Fig. 2-7-B. Then install it.
2. In case of the Gear Motor installation, check if the value
of the Fig. 2-7-C is correct.
3. When installing the wire of the Switch PCB Ass'y, install
it correctly as Fig. 2-7-D.
4. After the assembly of the Traverse Ass'y, hook the wire
on the Traverse Ass'y as shown Fig. 2-7-E.
Manual soldering conditions
• Soldering temperature: 320 +/- 20˚C
• Soldering time: Within 3 seconds
• Soldering combination: Sn-3.0Ag-0.5Cu
[OK]
[NG]
Fig. 2-7-B
Rack Feed Ass'y
Push
Push
Fig. 2-7-C
8.0 +/- 0.2mm
Safety surface for pressing
of the insert.
Feed Motor
Gear Motor
Check Lock
1
5
4
2
3
5
1
5
4
2
3
2
3
4
5
Summary of Contents for DV DV-SP405
