![background image](http://html1.mh-extra.com/html/onkyo/ds-a1xp/ds-a1xp_instruction-manual_1636860008.webp)
En-
8
Using the RI Dock
—Continued
■
Using Your iPod’s Alarm Clock
You can use your iPod’s Alarm Clock function to
automatically turn on your iPod and AV
receiver/amp at a specified time. Your AV
receiver/amp’s input source will automatically
be set to the input to which your iPod is con-
nected.
■
Charging Your iPod’s Battery
The RI Dock charges your iPod’s battery while
your iPod is in the RI Dock.
Operating Notes:
•
The RI Dock must be connected to your
AV receiver/amp with both an
cable
and an audio cable to use the
func-
tions.
•
If your AV receiver/amp doesn’t support
the System On, System Off, Auto Power
On, and Direct Change functions, you’ll
need to turn your AV receiver/amp on
and off and select the input source man-
ually.
•
Before you select another input source,
stop iPod playback to prevent your AV
receiver/amp from selecting the iPod
input source by mistake.
•
If any accessories are connected to your
iPod, your AV receiver/amp may not be
able to select the input source properly.
•
While your iPod is in the RI Dock, its vol-
ume control has no effect. If you adjust
your iPod’s volume control while it’s in the
RI Dock, make sure it’s not set too high
before you reconnect your headphones.
Notes:
•
To use this function, your iPod must be in
the RI Dock, and the RI Dock must be con-
nected to your AV receiver/amp with
both an
cable and an audio cable.
•
When you use this function, be sure to set
your AV receiver/amp’s volume control to
a suitable level.
•
Your AV receiver/amp may take several
seconds to startup, so you might not hear
the first few seconds of the first song.
Notes:
•
To charge your iPod battery, the AC
adapter must be plugged into a suitable
wall outlet and connected to the RI
Dock’s DC IN jack.
•
See your iPod’s instruction manual for
more information on battery charging.