En-2
■
Removing the Speaker Grilles
You can use the speakers either with or without their
grilles, which can be removed as follows.
■
Using the Supplied Cork Spacers
Make sure to use the supplied cork spacers for stable
bases and better-quality sound. The cork spacers also
protect the bottom of the speaker from migrations of a
plasticizer.
Attach the cork spacers to the four corners of the
bottom of the speaker.
■
Using the Supplied Spike
The speaker can be placed with upward angle by using
the supplied spikes.
1. Attach a nylon washer, spike nut, and spike in that
order into the screw holes (two) on the bottom of
the speaker.
2. Adjust the height of the spikes to the same level
and make them stable.
3. Tighten the spike nuts firmly.
・
We recommend the use of supplied spike tray. Refer
to “Placement” for details.
Note
Please note that moving the speaker with the spikes
attached can damage the flooring. Make sure not to get
injured with a tip of the spike when you attach it.
Before Using the Speaker System
Remove
Replace
Cork spacer
Bottom
Cork spacer
Bottom
Bottom
Washer
Spike nut
Spike
Summary of Contents for D-509C
