Onkyo CS-V645, Instruction Manual

Page: 18 / 36

18
En
Basic Operation
Basic Operation
1
Press
9 ON/STANDBY
to turn the unit on.
• The unit turns on with the source that was last
selected.
2
Press DVD , iPod / USB , FM , or LINE to select a
source.
The selected source is shown on the front panel’s
display.
Press
LINE repeatedly to switch between LINE 1
and LINE 2.
Also, each time
INPUT
on the unit is pressed, the
source changes as follows:
• DVD Source
• iPod
• USB Source
• FM Radio
• LINE1 Source
• LINE2 Source
3
Play the source, and adjust the volume using
q
VOL
w
.
You can rotate the VOLUME knob on the unit to
reduce or bring up the volume continuously.
• Press
9
ON/STANDBY to put the unit in the
standby mode when it is not being used.
Setting the Clock
1
If the unit is on, press 9 ON/STANDBY to turn
it standby.
2
Press CLOCK to show the time on the display.
• The time appears on the display (if the time is not
set after it blackout, “ --:-- ” blinks). Press
CLOCK
again, the “hour” value starts blinking.
• When no button is pressed for 30 seconds, the time
setting mode will be cancelled.
3
Press
q VOL w
to set the current hour.
4
Press CLOCK .
The “minute” value starts blinking.
5
Press
q
VOL
w
to set the current minute.
6
Press CLOCK .
The clock starts.