Onkyo A-DS650, Instruction Manual, Page: 14 / 36

14
Speaker system setup
You can set up the speaker system after connecting the
speakers correctly (see page 11~12). Be sure to set up the
system following the instructions below. Otherwise, the A-
DS650 may not operate properly.
1. Press the PARAMETER button.
2. Rotate the SMART SCAN CONTROLLER to select
“System Setup” and press the ENTER button.
“Sp. Setup” appears, and you can select the type and
size of the speakers as follows.
3. Press the ENTER button.
You can set a subwoofer parameter. Options are “Sub-
woofr YES” and “Subwoofr NO”.
4. Rotate the SMART SCAN CONTROLLER to select
the desired option.
If a subwoofer is connected to your system, select
“Subwoofr YES”.
5. Press the ENTER button.
You can set a front speaker parameter. Options are
“Front LRG (large)” and “Front SML (small)”.
6. Rotate the SMART SCAN CONTROLLER to select
the desired option.
If you have selected “Subwoofr NO” in step 4, “Front
LRG” will be selected automatically.
7. Press the ENTER button.
You can set a center speaker parameter. Options are
“Center LRG (large),” “Center SML (small),” and
“Center NON (none).”
8. Rotate the SMART SCAN CONTROLLER to select
the desired option.
You cannot select “Center LRG” if you have selected
“Front SML” in step 6.
9. Press the ENTER button.
You can set a surround speaker parameter. Options are
“Surround LRG (large),” “Surround SML (small),” and
“Surround NON (none).”
10. Rotate the SMART SCAN CONTROLLER to select
the desired option.
You cannot select “Surround LRG” if you have
selected “Front SML” in step 6.
•
If the surround speaker parameter is set to “Surround
NON,” you may select STEREO or DOLBY 3 stereo as
Surround mode. To use Surround mode, you should at
least select either the center or surround speakers. Other-
wise, Surround mode is disabled and the unit remains in
STEREO mode.
Speaker Settings
LRG(Large):
Select this for large,wideband speakers.
SML(Small): Select this for small speakers with limited
bass signal handling. With this setting, the bass sounds of
the speakers set to SML are re-directed to the subwoofer
or other speakers set to LRG.
NON(None): Select when center and surround speakers
are not used.
Setting up the system
SMART SCAN CONTROLLER
PARAMETER
ENTER
1
2
SMART SCAN CONTROLLER
ENTER
3, 4
SMART SCAN CONTROLLER
ENTER
5, 6
SMART SCAN CONTROLLER
ENTER
7, 8
Center
Front L ch. Front R ch.
Surround L ch. Surround R ch.
Front L ch. Front R ch.
Surround L ch. Surround R ch.
Center
Front L ch. Front R ch.
Surround L ch. Surround R ch.
SMALL
LARGE
NONE
SMART SCAN CONTROLLER
ENTER
9, 10
or
or
or
or
or
or
SMART SCAN CONTROLLER
PARAMETER ENTER
DIGITAL AUDIO
SELECTOR
SMART SCAN CONTROLLER
ENTER
SURROUND
PARAMETER
3-D BASS MAIN REMOTE
SPEAKERS
REC OUT MULTI SOURCE Re-EQ
MIDNIGHT
THEATER
C D PHONO TUNER TAPE-2
MONITOR
TAPE-1
M D
VIDEO-2
VCR-2/TV
VIDEO-1
VCR-1
DVD INPUT
SELECTOR
®
MULTI-CH
INPUT
MASTER VOLUME
TREBLE BASS
AUDIO VIDEO CONTROL AMPLIFIER
A-DS650
MAX MIN
SYSTEM
POWER
ON
PHONES
STAND-BY
OFF
MULTIPLE SOURCE
REMOTE SYSTEM
HIGH DEFINITION
Re-EQ
TM
DOLBY SURROUND
P R O • L O G I C