manualshive.com logo in svg

Onix x-series, Enjoyment Manual

Share
Download
Onix x-series Enjoyment Manual Download Page 6

Page  6

Page  7

Features and Descriptions

Onix x-ls 2-Way Monitors

Woofer

• Curvelinear Treated Paper Cone Woofer

• Polymer Chassis for Reduced Baffle Resonance

• Proprietary Venting System for Voice Coil Cooling

• Vented Enclosure tuned at 43Hz

Tweeter

• Treated Fabric Dome Diaphragm

• Three Layer Pole Piece Damping Treatment

• Ferrofluid Voice Coil Thermal Management

Onix x-cs Center Channel

• D’Appolito Alignment

Woofers

• Dual Curvelinear Treated Paper Cone Woofers

• Polymer Chassis for Reduced Baffle Resonance

• Proprietary Venting System for Voice Coil Cooling

• Sealed Enclosure (F3 = 65Hz)

Tweeter

• Treated Fabric Dome Diaphragm

• Three Layer Pole Piece Damping Treatment

• Ferrofluid Voice Coil Thermal Management

Onix x-sub Powered Subwoofer

Amplifier

• 150 Watts RMS

• Speaker or Line Level Inputs

• Adjustable Gain

• Selectable 0 or 180 Phase Control

• Adjustable Active Crossover (40-150Hz)

• Signal Sensing Auto ON/Standby Mode 

Subwoofer

• 8” Long Throw, Low FS, “Mass Loaded” Woofer

• 32 Ounce Magnet

• 2 inch Voice Coil

• Vented Enclosure tuned at 32Hz (-3dB @28Hz)

x-ls Monitor

x-sub (Back)

x-sub (Front)

Summary of Contents for x-series





















Reviews:

No comments

Brands by name

Popular brands

Load more brands