background image

Page  10

Page  11

Speaker Placement Alternatives

In a perfect world, you have a room dedicated only to your audio/video needs and you 

can set up the room to suit the needs of speaker and equipment placement. Well.., that’s 

in a perfect world and at AV123 we are aware that most rooms have other uses too. This 

means we’ve considered some alternatives to speaker placement and/or mounting that 

may help you blend the ideal placement with a realistic solution for your application. 

Shelf Mounting

Logically, this may be your first consideration and that’s fine 

if the shelf is sturdy enough and deep enough to hold your 

speakers securely. Remember, a shelf that is up against a wall 

should be at least 3” deeper than the speaker itself to allow 

for cable connections and port “breathing” room. So, since 

your Onix x-ls speaker is 12.125” deep, you will need to allow 

a minimum 15.125” of shelf space which may not be possible 

with all types of shelving (especially the stuff you assemble 

yourself such as IKEA, etc.). Since the Onix x-series monitors 

are bass reflex enclosures with a port on the rear panel, the 

distance between the back wall and the port is very important for 

proper bass reproduction. Please do not block it. In fact, if you’re 

positioning your speakers on a shelf, try to leave at least 3” to 6” of 

open space behind the rear panel whenever possible. 

Note: 

These recommendations are for 

open 

shelves. Mounting your speakers on 

“enclosed shelves” as would be found in an entertainment center or built-in cabinets can 

affect bass response substantially. We do not recommend this as it forms a “speaker 

cabinet within a cabinet” effect.

For shelf mounting, use the adhesive rubber feet provided or a moldable, 

reusable adhesive such as BluTack or other “earthquake wax.” If you elect 

to use the rubber feet, simply peel them from the protective sheet and 

apply them close to the corners of the speaker bottom. Be sure the shelf 

itself is firmly in place and there are no loose items on the shelf to rattle 

or buzz while the speaker is playing. Again, BluTack or similar is great for 

securing and damping your speakers. 

Rubber Feet

For Shelf Mounting, 

the shelves should 

be deep enough and 

open so the acoustic 

signature of the 

speaker does not 

change.

Summary of Contents for x-series





















Reviews: