![background image](http://html.mh-extra.com/html/onix/ph-15/ph-15_user-manual_1636178005.webp)
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong
with this component, check the points below. Sometimes the trouble may lie in another component. Investigate
the other components and electrical appliances being used.
If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest ONIX authorized
service center or your dealer to carry out repair work.
5
Specifications
Warranty
For warranty information, please contact your local ONIX distributor. Your purchase receipt is your permanent record
of a valuable purchase. It should be kept in a safe place to be referred to as necessary for insurance purposes or when
corresponding with ONIX. When seeking warranty service, it is responsibility of the consumer to establish proof and
date of purchase. Your purchase receipt or invoice is adequate for such proof.
Every specification and design of the product is subject to change without prior notice
3.5 mV/47KΩ/150pF
40 dB
>95dB (±0,5 mV)
MM 22 dB
<0.01%(20Hz - 20kHz)
SENSIBILITY IMPEDANCE
GAIN
SIGNAL/NOISE RATIO
OVERLOAD
THD
Recommended Phono Detector
MM 2.5 mV - 5 mV di uscita
MM
MC
>75dB (±0,5 mV)
<0.04%(20Hz - 20kHz)
DIMENSION
(W x D x H): 215 x 365 x 102 mm
WEIGHT
POWER CONSUMPTION
<10W
FREQUENCY RESPONSE
20Hz - 20KHz (-0.5dB)
POWER SUPPLY
220V-240V AC
MC 0.5 mV - 1 mV di uscita
0.5 mV/100Ω/470pF
3,3 Kg
60dB
± 0.2%
250 mV
100 Ohm
MC 20 dB
RIAA DEVIATION
OUTPUT VOLTAGE
OUTPUT IMPEDANCE
Fault
No power
No sound
Possible causes
Poor connection in socket or no utility.
Audio cable not connected.
Treatment
Check power source and connect socket tightly.
Connect audio cable properly.
SENSIBILITY IMPEDANCE
GAIN
SIGNAL/NOISE RATIO
OVERLOAD
THD
Recommended Phono Detector