![background image](http://html.mh-extra.com/html/onix/kz3001/kz3001_assembly-instructions-manual_1636228002.webp)
1
2
3
4
5
7
6
1
2
3
Before assembly make sure you have enough room to put the net together. The net assembly is 22 feet (6.7m) wide, a
standard pickleball court is 20 feet (6.1m) wide and 44 feet (13.41) long. See Page 4 for an Illustration of the Court.
SET-UP:
5
7
5
Detail B
5
5
5
8
6
7
Detail A
Spring Lock
Start with this End Base
1.
Take all components out of the case and sort them, all items are labeled.
a.
Set End Base
(#1)
on a hard flat surface, insert Net Support Tube
(#2)
and Angled Tube Support
(#3).
b.
Insert the Short Support Tube
(#4)
to tube
(#3)
followed by two Long Support Tubes
(#5).
c.
Insert “T” Support Tube
(#7)
to Middle Base
(#6)
until the spring lock engages in to the hole on the Middle Base. See
Detail A
.
d.
Slide Middle Base Tube assembly over Support Tube
(#5)
from
Step b
. Then insert another
(#5)
Support Tube as shown in
Detail B
.
c.
Complete the frame assembly by connecting another
(#5)
, tubes
(#8)
,
(#3)
, End Base
(#1)
and Net Support Tube (
#2
)
-2-