ONIX DNA
9
Operation
Volume Control
Source Selection
Volume
Control
Source
Selection
DSC/BDA I/P2 I/P3 I/P4 I/P5 I/P6
This is very simply operated, the small green LED on the volume control dial
shows you how loud the amplifier currently is. In the example shown above
there is no sound but its maximum volume would be a fully clockwise rotated
dial in a locked position.
This dial unlike the Volume Control will not rotate in one continuous motion,
this is because it is designed to lock on to each source as you rotate it.
You may notice that there are 6 small LED holes along the front of your unit
which have been pointed out in the diagram above. As stated on the
Connections Page, these correspond with the inputs on the back so it is very
easy to navigate your way through your inputs either with the Source
Selection dial or the remote. Only one LED will ever be lit at one time as you
can only ever use one input at one time, however for demonstrational
purposes we have shown you all the available inputs together. We felt that
the use of various colours would not only be visually more interesting, but
an efficient way to manage however many inputs you choose to use.
