manualshive.com logo in svg

Onix DNA-50, User Manual, Page: 8 / 11

Share
Download
Onix DNA-50 User Manual Download Page 8

Launch 

ONIX DNA 

8 

Power Off 

Power On 

Volume 
Control 

Source 
Selection 

Input Indication 

It is now time for you to turn on your  
DNA-50 for the first time. Now that you 
have your mains lead connected to the  
amplifier and a plug socket, you can  
locate this switch on the back of your  
amplifier and switch it on.  

You will notice that the Volume Control dial on the left 
has a smaller hole located on it that has now  
illuminated a dim green. This means that your DNA-50 is 
powered and operational, but in Standby mode.  

Simply turn the source selection knob clockwise or  
anticlockwise once and the green LED will brighten,  
indicating your amplifier is now out of Standby mode 
and ready for your choice of input. 

Further to this, you will see that one of the 6 LED’s pointed out above has  
illuminated. This is showing you which input is currently active. 

It is highly recommended that the amplifier is left switched on at all times, as it will 
sound better after two hours plus of being left on. 

Summary of Contents for DNA-50












Reviews:

No comments