15
14
OPERATION TIPS
GENERAL INSTRUCTIONS FOR
INSTALLATION
Locating the indoor and outdoor units
properly will help optimise the performance of
your airconditioner. While your Onida /
Dealer's Technician will be happy to guide you
on the best location for your airconditioner,
here are a few helpful hints.
Locating the Indoor Unit
• Locate the IDU for the best cool air
circulation. Preferably, there should be
no obstructions nearby, as shown in the
adjacent figure.
• Do not locate the unit directly opposite a
door which is opened frequently. The
cold air will go out of the room each time
the door is opened, as shown in the
adjacent figure.
• All indoor units will form condensate water.
Please ensure that the condensate can
be drained out of the room to a toilet /
pantry, etc. The installation engineer will
make sure that a "U" bend is provided in
the drain to prevent insects from coming
into the room through the drain tube, as
shown in the adjacent figure.
9. Auto-restart function
Power failure during operation will stop the unit completely.
For the unit without Auto-restart feature, when the power restores, the OPERATION
indicator on the indoor unit starts flashing. To restart the operation, push the ON/OFF
button on the remote controller. For the unit with Auto-restart feature, when the power
restores, the unit restarts automatically with all the previous settings preserved by the
memory function. For some models, the machine is special designed with Auto-restart
function for the open angle of the horizontal louver. Power failure during operation or
pressing the ON/OFF button on the remote controller will stop the unit completely. When
the power restores or pressing the ON/OFF button on the remote controller again, the unit
restarts automatically with all the previous settings including the open angle of the
horizontal louver by the memory function. So we strongly suggest that the open angle of
the horizontal louver should not be set too small, in case the condensed water forms and
drops from the horizontal louver. Press the AUTO/COOL button under the front panel and
the open angle of the horizontal louver will be restored to the standard angle when the
condensed water forms on the horizontal louver.
10.
Lightning or a car wireless telephone operating nearby may cause the unit to
malfunction. Disconnect the unit with power and then re-connect the unit with power
again. Push the ON/OFF button on the remote controller to restart operation.
