11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • [email protected]
F-5000 Software Manual 10/16 - 2032 / 107050
Page 14
1
2
3
4
5
6
7
i
Notes:
1. This field will show the firmware version for your model type of meter (F-5400 or
F-5500)
2. The Password Level will show whether the user has entered a Level 1 or Level 2
password. Not all parameters may be accessed at a Level 1 password.
3. This section will only show for a Model F-5500. The F-5400 does not come with a
display
4. This field will display the gas that the flow meter has been calibrated to measure.
5. The pulse settings will only show on a flow meter that has been ordered with the
Pulse Option.
6. The "Save/Restore Parameter" options are not available using a Level 1 password.
7. The serial communication settings can be accessed by clicking on the "Serial COM
Settings" button. The serial communication settings will only show on a flow meter
that has been ordered with either the HART or MODBUS/BACnet communication
options.
Unit Select
The "Unit Select" section is used to change the desired units in the flow rate,
temperature and reference pressure parameters.
Fig. 3.4: Level II Configuration Screen - Password Levels and Options
F-5000 View
OPERA
TION
Unit Select
Operation: Configure
Configure
Options