background image

17

Pentair Water Product Warranty

Pentair Water warrants that, when this product is used for the purpose it was designed, is correctly housed and vented against 
weather, vermin, dust etc., that it will be free of material and manufacturing defects at the time of the original purchase.
This warranty is limited to the cost of the product and does not cover third party costs including the costs of 
electricians, plumbers, etc. unless authorised by Pentair Water.

TERMS AND CONDITIONS APPLICABLE INTERNATIONALLY

How long the warranty is effective Internationally

1) This Pentair Water product is warranted for 12  months for all parts from the date of the fi rst consumer purchase. Should 

any parts fail as a result of such defects within the specifi ed period, the part will be replaced free of charge. (This does 

not include travel charges, removal and reinstallation charges.)

TERMS AND CONDITIONS APPLICABLE IN AUSTRALIA AND

NEW ZEALAND

1) 

YOU SHOULD CAREFULLY READ THE INSTRUCTIONS SUPPLIED PRIOR TO USING THIS PENTAIR  

 

WATER PRODUCT.  

 

This product is to be installed and operated in accordance with the instructions   

 

 

provided. This warranty will not apply if it is used in a manner other than in  

 

 

 

accordance with the instructions.

What the warranty covers:

Pentair Water warrants its products to be free of defects in material and workmanship during the warranty period.  

If a product proves to be defective in material or workmanship during the warranty period, then Pentair Water 

will, at its sole option repair or replace the product with a like product.  Replacement product or parts may include re-

manufactured or refurbished parts or components.

How long the warranty is effective: 

1) 

This Pentair Water product is warranted for 24 months for all parts from the date of the fi rst   

 consumer 

purchase.

2)   Authorised workshop labour will be free of charge for the fi rst 12 month period from date of the fi rst  

 

consumer purchase when unit is found to have failed due to defective workmanship or material  

 

supplied by Pentair Water Australia.

 Infi eld service by an authorised Pentair Water Service Agent will incur a travel, removal &    

 

reinstallation fee payable by customer.

3) 

Where this Pentair Water product is sold for commercial application as defi ned in the relevant Trade  

 

Practices and Consumer Protection legislation the warranty shall be for a period of six months from  

 

the date of purchase by the end user.

Who the warranty protects:

This warranty is valid only for the consumer purchaser.  

What the warranty does not cover:

1) 

Damage, deterioration or malfunction resulting from:

 

a) 

accident, misuse, negligence, fi re, water, lightning, or other acts of nature, unauthorised product 

modifi cation or failure to follow instructions supplied with the product;

 

b) 

repair or attempted repair by anyone not authorised by Pentair Water;

 

c) 

any damage to the product due to shipment;

 

d) 

removal or installation of the product;

 

e) 

causes external to the product such as electric power fl uctuations or failure;

 

f) 

use of supplies or parts not meeting Pentair Water specifi cations;

 

g) 

normal wear and tear;

Summary of Contents for JMM100





















Reviews: