background image

3

SAFETY PRECAUTIONS

This  device  is  not  intended  to  use  by  individuals  with  restricted  physical  sensory  or  metal 
capacities  or those with lack  of experience  or knowledge, include children, unless they  are 
supervised by an individual who is responsible for their safety or have received training in oper-
ating the device .

    Please read the following very carefully as failure to comply may invalidate your 

guarantee

1)  DO NOT run the cleaner continuously for more than one hour at a time, as doing so can 
damage the internal components.
2)  DO NOT operate the unit without fluid in the tank. Always ensure the fluid is no higher than 
the max mark, Always ensure there is a minimum depth of 7cm.
3)  DO NOT drop any item into the tank as this may cause damage to the transducer. Always 
place the items gently into the tank and use the basket whenever possible.
4)  The more items that you place in your cleaning bath the less efficient it will clean. It is not 
advised to overlap items. Always allow plenty of clear space between the items.
5)  Do keep the lid on during use. This will prevent splashes and reduce evaporation of the fluid.
6)  Never immerse the machine or power cord in water or other liquid.
7) DO NOT touch the power plug with wet hands, especially when inserting or removing the plug.
8)  DO  NOT  touch  the  unit  if  the  machine  has  fallen  into  water  during  operation.                             
Remove the power plug from the socket first.
9) DO NOT disassemble the machine, except by professionals.
10) UNPLUG the power source while filling or emptying the tank.
11) DO NOT spray water or liquid over the device and the control panel
12) DO NOT operate the cleaner without proper grounding.
13) DO NOT place the device on a soft surface, where the vents could be blocked.
14) Always turn the heater off after using as leaving it on can cause the fluid to evaporate and 
damage the internal components.
15) Upon completion of the cleaning cycle, turn the heater button off and isolate the machine 
from the electrical supply.
16) Take care when adding or removing items from the cleaning tank as the fluid is likely to be 
hot and displaced fluid can damage the internal components. Any displaced fluid must be dried 
up immediately.
17) In the event of failure/emergency, disconnect the mains supply by removing the plug from 
the mains socket.

    Keep it away from children !

Summary of Contents for OZL-2AK









Reviews: