If you need to know more about the connection of a single panel, please refer to Solar Panel User Manual. Here we
focus on demonstrate how serial connection (up to three panels and the parallel connection of up to six panels). ONEUP
1000 supports 10-65Vdc input. When the input exceeds 65V, ONEUP 1000 overload protection will be triggered.
Voltage excessive may damage the product. Users should follow all the instructions in the manual. ONEUP does not
provide free repair services for any product damage caused by connecting many solar panels to the product or
incorrect connection, even during the warranty period.
How to recharge the ONEUP 1000 with solar panels?
a.
Users can connect 1 to 3 pieces of solar panels (do not connect more than 3 in series) in series as shown
in the figure below, to the MC4 port.
b.
Then, connect to MC4 to XT60 conversion cable.
c.
Use XT60 conversion port connect to the XT60 port on ONEUP 1000.
1. Recommended serial connection method
Users can connect up to 2 sets of solar panels in parallel to the MC4 port as shown in the figure. If you want to connect
6 solar panels, you can put them into 2 sets of 3 solar panels connected in series and then connect the 2 sets of solar
panels in parallel. Connect them with our MC4 to XT60 conversion cable and connect XT60 cable to the ONEUP 1000’s
XT60 input to charge the device. The parallel connection cable is an optional accessory needs to be purchased
separately.
2. Serial and parallel connection (Professional solution)
SOLAR PANEL CONNECTION
8
XT60 Connector
ONEUP 1000 Charging Port
SOLAR PANEL-21.6V
X3
MC4 Connector
ONEUP 1000