CARE AND MAINTENANCE
1. If the Can Opener slows during cutting, this may indicate low battery level
and the batteries should be replaced. If the Can Opener stops during
operation, see “Trouble Shooting” below.
2. To clean the Cutter, remove the batteries as a safety precaution and remove
the Front Cap. Wipe the Cutter with a damp cloth or a sponge, using a mild
non-abrasive cleaner, followed with a clean, dry cloth to dry it completely.
1. If the Can Opener is jammed due to low
battery level or a deformed can rim,
press the Button again to activate the
reverse function and the Cutter will reset
to the start position.(fig.6)
2. If batteries are depleted, the can may
not be released by pressing the Button.
Slide back the Battery Door and replace
2 AA batteries. The Can Opener should
continue the cutting. Press the Button again to reset the Cutter to the start
position after cutting is completed. Remember to replace the Battery Door after
battery replacement.
3. Cans with heavy seams and uneven rims may stall the Can Opener. If this happens,
follow above procedure to release the can. Start the cutting action just beyond
any minor bump or dent in a can.
NOTE: The Can Opener will not open rimless cans or cans with odd corners.
4. Can’s lid may get stuck at the Cutter after the unit stops. You may pull the lid
backwards by your hands and the lid will come free from the Cutter.
Fig.6
Press
the Button again
TROUBLE SHOOTING