CONNECTION TROUBLE SHOOTING
1. Unless using a PC to console link-up, only use the supplied short gold USB cable between your games machine and the Titan Two.
Avoid USB extension leads. Use long HDMI cables to bring the games machine closer to you if needed. Make sure all connections
are firmly in place. If USB-A socket LED flickers, try a different cable or controller. You may have a poor connection.
2. Press the UP button on the Titan Two to cycle the number to the slot you need.
3. Unplug and re-plug the Titan adapter. Reconnect in a different USB socket.
4. LED issues? Turn off console vibration if available (especially on Nintendo Switch, PS3 and PS4). Nintendo Switch may have some
display freezing if vibrating constantly.
5. Advanced: If instructed to update T2 firmware, you must
also update the SD card by pressing the “Configure” button in GTuner IV
Device Configuration window.
6. RetroPie: Use joystick mode N4 and roll the stick to exit some emulators.
N.B. Do not use round power socket on T2. Only use extra power as detailed on previous page.
For more help with your Game Control Mixer contact [email protected]. The Game Control Mixer is a
joint project with Celtic Magic. We are indebted to Jefferson Koppe (ConsoleTuner.com) and Scachi for their
invaluable help.
OneSwitch.org.uk
5 The Oaks, Billericay, Essex, CM11 2RP, UK
