ASSEMBLY INSTRUCTIONS (50-CS03)
7 of 10
STEP 1
NOTE: To distinguish between the left and right legs, note the extra holes in the right leg.
Attach the Right (6) and Left (7) Legs of the desk to the Lower Support Board (3) and
the Bottom Shelf (4) using eight Screws (H). Attach the Upper Support Board (5)
using four Screws (C). Use the Allen Wrench (K) to tighten the screws.
STEP 2
Place the Desktop (1) upside down on a soft surface. Flip the assembled frame over
and place it on the Desktop with the screw holes positioned as shown. Attach the
frame to the Desktop using the two L-Brackets (9) with four Screws (A) and two Screws (B)
(For each bracket use two Screws (A) to attach it to the Desktop (1) and one Screw (B) to
attach it to the leg).
Attach the Lift (8) to the Desktop (1) and the Upper Support
Board (5) using four Screws (A).
Screw the Glides (10) into the bottom of the legs.
K
K
7
10
1
9
9
6
4
5
8
5
3
Cx4
Hx8
C
C
H
Ax8
Bx2
A
A
B
B
