17
2hp 50hz Super Gorilla Owner’s Manual © O.A.S. 2010
XV. Stand Assembly
Stand Kit Contents
Stand Leg Set 35 Gal. (4) - SXX000035
Stand Leg Set 55 Gal. (4) - SXX000055
Mid-Gusset (4) - RFG010001
Top Gusset (4) - RFG010000
Rubber Leg Cap (4) - RCR012500
Hardware Kit (1) - AHX000100
1. Attach Top Gusset to the top of leg as shown in photo with (2)
1/4”-20 x 2” bolts. Then secure with 1/4“ Flat Washer and 1/4”- 20
Nylock Nut. Attach Mid-Gusset to middle of leg as shown with (2)
1/4”-20 x 3/4” bolts and secure with 1/4” Flat Washer and 1/4”- 20
Nylock Nut. Put Rubber Leg Cap on bottom of leg. Repeat on other
three legs.
2. Attach Stand Braces to the inside of Mid-Gussets with (2) 1/4”- 20
x 3/4” bolts and secure with 1/4” Flat Washer and 1/4” - 20 Nylock
Nut. Adjust the legs for the 21” or 23” cone by positioning the bolts in
the appropriate position in the slotted brace hole. After assembly,
make sure your Dust drum slides between the legs for easy empty-
ing.
3. You may want to put the stand on it’s side when you attach the
collector cone and barrel.
Always have appropriate help when
lifting or moving the stand and collector. The unit is heavy!
4. Bottom of Cone and Barrel rim go on top of stand gussets. Use the
included cyclone hardware to attach to stand. Use (2) 5/16” x 1”
bolts, (2) 5/16” flat washers and (2) 5/16” whiz nuts on each gusset.
35 & 55 Gal. Stand - STG000035 / STG000055
Stand
Brace
Top Gusset
Mid - Gusset
Rubber Leg Cap
56”/
68”
27.5”
27.5”
Stand Brace 21” - 23” (4) - RFG010002
2
