O.A.S. 2005
c
3HP High Vacuum Owners Manual
11
X. Accessories
Dust Bin Options -
(Must Order Custom Mounting Stand.)
2. Hoppers -
Large capacity hoppers from .5 cu. yd. to 3 cu. yd.
3/16 reinforcing angle for added support - 3/16 plate body is 100% continuously
MIG welded on inside - 3/8 rear cross brace angle (not 3/16) - three 3 base
channel - All angles are structural not formed.
3. Air Locks -
Rotary air locks provide an alternative to an air tight dust bin for larger
volume capacity and less maintenance.
Example - A 10 air lock will drop 1.85 cu. ft. / rev. of material.
1. Multiple Drums -
Custom order the System Mounting Stand for multiple drums or hoppers.
Stand widths will vary depending on dust container.
Magnetic Motor Starters -
The 3hp high pressure dust collectors do not
come wired or with an on/off switch. Because of the voltage and
amperage requirements of the system, an industrial switch must be
used.
OAS offers Square D Full Voltage Non-Reversing across the Line
Starters, Nema Type 1 Enclosure with Start/Stop in cover, and class 10
overload. Industrial switches can also be purchased through your local
electrician. Due to varying electrical codes, OAS cannot specify exact
wiring requirements. When wiring the collector you should always hire
a licensed electrician.
Bin Level Monitor -
Provides level sensing for dry bulk solids. The monitor
operates by using a 1 rpm synchronous motor to rotate a paddle.
When paddle rotation is impeded by material surrounding it, the motor
is de-energized and triggers a SPDT snap switch. The snap switch can
be used in conjunction with a motor starter to turn equipment off or
provide alarm functions.
ABX000000
The BAG Gripper provides the ability to use convenient plastic bags inside
your dust drum. It provides a constant, negative pressure on the outside
surface of the plastic bag that keeps it pulled tight against the sides of the
dust drum. Can be used with 35 and 55 gal. barrels. Must be wired into
your system.
The BAG Gripper
