OneFex CE-IO1600, Manual

Page: 5 / 35

5
/ 13
CE-IO1600 User Manual
1 Product Introduction
CE-IO series products are Ethernet I/O module using standard Modbus RTU/TCP protocol,
integrates DO (digital output), DI (digital input), AI (analog input).
The communication method supports Ethernet networking, 7~40V wide voltage power
supply, and supports functions such as logic control between analog acquisition and relay
output.
Widely used in farms, agricultural greenhouses, IoT terminals, water conservancy,
electricity, gas collection and control and other application scenarios, its unique logic control
function can easily realize automatic water supply, fertilization, start and stop valves It is an ideal
device for small automatic control scenes.
1.1 Features
◆
DC 7-40V wide voltage power supply, support anti-reverse connection;
◆
16* DO contact isolation, normally ON and normally OFF, 10A 250VAC / 10A 30VDC;
◆
LED indication, 1 for power and working status; 16 leds for DO status;
◆
Supports RS485 + Ethernet Communication interface, power isolation plus signal isolation, reliable
communication;
◆
Communication baud rate: 300bps~38400bps (, It is 9600 by default and can be
modified by software);
◆
Support standard Modbus RTU/TCP protocol, read and write by register address;
◆
Support input and output linkage, such as local linkage or dual-computer linkage, which is
convenient for multi-terminal control;
◆
Support flash ON flash OFF;
◆
Supporting setting software for setting parameters and IO control;
◆
Support software and hardware customization.
1.2 Parameter
Paremater
Contact capacity 10A/30VDC;10A/250VAC
Durability
100,000 times (Electrical
）
10,000,000 times (Mechanical)
Data interface RS485/Ethernet
Default IP 192.168.16.254
Working Voltage DC 7-40V
Power / work indication 1 red LED
(power, always on; working, flashing)
Output indication 16 red LEDs (relay on and off)
Working temperature
-40
℃～
85
℃
, Industrial Grade
Size 180*94*41mm
Weight 450g
Default communication format 9600,n,8,1
Baud rate 300~38400bps
Software support Setting and control software;
Support various configuration software;
support Labviewd, etc.