11
/
13
CE-IO1600 User Manual
3.1.2
Networking mode
Check to make sure that the computer network and the router/switch connected to io are in
the same network.
Note: generally, there are multi-level networks in the enterprise. When the computer is
connected to the wireless network and the io is connected to the router through a network
cable, it must be confirmed that the router connected to the io is the same as the wireless
WIFI router.
➢
searching
；
➢
View current network information
Open [Network and Sharing Center]---->[Active Network]---->[Local Area Connection/Wireless
Network Connection]---->[Details], as shown in the following figure:
Summary of Contents for CE-IO1600
