signal path: loop1 > loop3 > loop2
4- Loop Code
The loop code shows the active loops and connection order.
4
signal path: loop3 > thru > loop1
16 editable programs are stored in 8 banks, they can be recalled
by pressing PGM1/ PGM2 switch. Each program have two status
- recall/bypass, step on an recalled program will toggle to bypass.
The program is editable only when a program is recalled
(PGM indicator lights up). Each loop station (1/2/3) can be
assigned with loop1/loop2/loop3/through by pressing the
buttons, each loop (loop1/loop2/loop3) can only be assigned once
in a program, see section 4 for more details of loop code.
Edit the buffer by pressing the BUF
"
"
under
"
" button, the buffer could
be on/off even in bypass status of a program, see section 5 for
more details of buffer code.
3- Edit Programs
The BJF buffer is a post buffer which is in front of all the loop stations.
the BJF buffer could set to turn on/off in both status (engage/bypass)
of a program, the buffer code shows the on/off setup in each program.
Program recalled
5- BJF Buffer and Buffer Code
Program bypassed
buffer
ON
buffer
ON
Program recalled
Program bypassed
buffer
OFF
buffer
ON
Program recalled
Program bypassed
buffer
ON
buffer
OFF
Program recalled
Program bypassed
buffer
OFF
buffer
OFF
