Top Panel
Rear Panel
(1) PGM1/PGM2
The two footswitches recall program 1/program 2 stored in the memory.
(2) Programmer buttons
(3) PGM indicator
(4) LOOP display
(5) BANK switch
(6) BJF buffer indicator
2
Press again on a recalled program will master bypass the switcher.
These are programmer buttons, 1", 2", 3 are to edit the order of the loops,
"
"
" "
“
1"
“
2"
”
3" represent the positions in the signal chain,
Program indicator, it lights up when a program is recalled.
The display show the connection order of active loops.
The switch scrolls up the bank number by short pressing, or hold this switch for 2s
to change the memory lane (see section 6).
The indicator lights up when the BJF buffer is on.
1- Overview
1
2
3
4
5
8
6
7
3
10
11
12
13
14
15
16
9
(7) MUTE indicator
The indicator lights up when the switcher is muted.
(8) MUTE switch
The switch mutes the output, at the same time connects
“
Input
”
jack to
“
Tuner
”
jack.
"
" is to on/off the BJF buffer circuit. Check the detail in the programmer section.
BUF
