10
Monting and Initial Use
•
Open battery cover and install 9-Volt battery:
• Assemble stake and attach sprinkler head and stake to housing:
•
Connect the water hose and position the device pointing at the desired area. Push the sta
-
ke into the ground without pressing on the sensor housing or the sprinkler. Use a flower pot
(or similar) filled with sand or gravel, if the ground is too hard or unsuitable for the stake.
•
Point the device to the desired area. Set the sensor sesitivity with the knob on the back of
the sensor housing.
•
Position stem tabs to adjust sprinkler travel (Position the stem tabs so the metal wire clip
travels between these tabs and faces the area to be sprayed).
•
Adjust the distance of water spray by turning the knob on the sprinkler top.
(Model 10028969 only)
Summary of Contents for 10028969
Page 1: ...Vogelschreck Sprinkler 10028969 10028970 ...
Page 4: ...4 Kaskadierbar ...
Page 9: ...9 Multiple connections ...
