Pairing Helmets for BLINC
™
III Intercom
1. Before pairing, make sure there is no Bluetooth
®
device active in your area.
2.Turn on the RIDER Bluetooth.
®
2. Press the control Button to
turn on the RIDER Bluetooth unit, release the button and wait until
the display shows, "BLINC ON," and then shows, "BLINC." Turn
and hold the Control Button counter or clockwise for 3-4 second
on the RIDER Bluetooth Helmet.The display will first show
“FM Radio On.” CONTINUE TO HOLD THE DIAL until the
display reads,“ICOM PAIRING.” Release the button as soon as
“ICOM PARING” is shown on the display.
3. PASSENGER-Seeking mode.
Press and hold the
Multi-Function Button (MFB) on PASSENGER Bluetooth
®
Helmet
for about 5 seconds to enter the pairing mode.The display will
show “PAIRING.” Release the MFB.
4.
If the pairing is successful, the rider display will show “CONNECT” then,“INTERCOM.” The RIDER intercom will
now make a call to the PASSENGER intercom automatically.After about 3-4 ringtones, the PASSENGER
intercom will answer automatically.The display will show “PAIRED,” then “INTERCOM.” Either RIDER or
PASSENGER can terminate the call by pressing the MFB.
RIDER
PASSENGER
RIDER
PASSENGER
