Blinc
™
lll Bluetooth
®
Headset Control Unit
MFB: Multi-Function Button
VOL+: Volume Increase
(turn clockwise)
VOL– : Volume Decrease
(turn counter clockwise)
OLED Display Screen
Turning the BLINC
™
III Headset ON
When turned on, the BLINC
™
III
headset automatically establishes
hands-free phone and streaming
music connections with the last
connected Bluetooth
®
devices
(phone and/or music device).The
“phone connecting”icon will be
shown onthe display screen.
Press and hold the Multi-Function
Button (MFB) for approximately
2seconds until you hear a short
tone (if your helmet is off, put your
ear close to one of the speakers).
The display will show “BLINC ON,”
then“BLINC,” then the state of the
battery will be shown.
Push MFB Here
Turning the BLINC
™
III Headset OFF
Press and hold the Multi-Function Button (MFB) for approximately 5 seconds until you hear a short high tone
followed by a short low tone.The display screen will show “BLINC OFF.”
Adjusting the Volume
This BLINC
™
III headset has a volume control dial: VOL+ and VOL– (the MFB is in the center of it). You can adjust
the BLINC
™
III headset speaker volume by turning the dial during a call or adjust the ring volume when you are not
engaged in a call.
Volume Decrease
(turn counter clockwise)
Volume Increase
(turn clockwise)
MFB: Multi-Function Button
