FEB-9455 Main Board
9
Hard Disk Drive Installation
Model H700B comes with an empty hard disk drive (HDD), unless a special request has been
made.
Installing a HDD
1. Turn off power and remove power cable from main unit.
2. Remove the Base/HDD Plate from the
base (4 screws).
3. Secure the hard disk drive on the plate (4
screws).
4. Plug the SATA cable to the HDD.
5. Put the plate back to the base and
secure with 4 screws.
6. Connect the main unit power.
Note:
If the HDD does not work normally, please refer to
troubleshooting.
