6.2 Basic Settings:
6.2.1 Wiegand Parameter Input Zone:
It is mainly related to Wiegand output interface. Only communication mode is Wiegand26
or Wiegand34 available.
Byte Offset
:
The byte of card number to be offset, there is a initial position when read
card number. To change the initial position, for example Wiegand 26,output 3 byte, but
18600-6B card number (E0 01 02 03 04 05 06 07) i s 8 byte, the parameter is this 3 byte,
when the value is 0, it is (E0 01 02), when the value is 1, It is (01 02 03)... More details,
please refer to Wiegand protocol.
Output Period
: It is frequency of Wiegand port. More details, please refer to Wiegand
protocol.
Pulse Width
: It is the time length of Wiegand signal.
Pulse Period
: It is interval time that from first low pulse to next low pulse sending. For
details, please refer to Wiegand protocol.
Note: In general, user only need set byte offset, other setup is default.
6.2.2 Basic Parameters Input Zone:
Work Mode
: