2.c. Removing the Host Cable Adapter
1) To remove cable pull back on green thumb tab to release connector teeth and gently separate.
2) Loosen and remove the screw before removing the Host Cable Adapter from the card slot.
2.d. When using with any third party I/O device:
1) Install the downstream board into the appropriate PCIe slot.
2) Connect the external power source (separate from the host system power supply) to the downstream device if
necessary.
3) Connect the PCIe cable to both the upstream host adapter and the downstream device.
One Stop Systems
OSS-PCIe-HIB25-x4-H/T
Rev. A
Page 4
