One Stop Systems, Inc. OSS-lanPCI-4GC User Manual
Rev. A
2
Description
The OSS-lanPCI-4GC four port Gigabit Ethernet controller is designed to be a high-performance, low cost, LAN connectivity
solution for any system or networking device utilizing the PCI standard bus architecture. The adapter is ideal for servers and
workstations that require quad Gigabit Ethernet connectivity.
Independent MAC addresses are assigned to each controller channel, which provides support for Ethernet trunking across multiple
connections.
Backpanel LEDs indicate full status including: 1000/100/10 megabit mode and full-duplex mode. Full-duplex capability provides
simultaneous transmission and reception for maximum performance. The Gigabit Ethernet controllers on the OSS-lanPCI-4GC
provide efficient DMA operation for optimal bus utilization. The adapter utilizes maximum PCI bandwidth in 32/64-bit and 33/66 MHz
PCI buses
.
Initial Set-Up
Unpacking Instructions
1. If the carton is damaged when you receive it, request that the carrier's agent be present when you unpack and inspect the
equipment.
2. After unpacking, verify that all items listed in the packing list are present.
3. Inspect the equipment for shipping damage.
4. Save all packing material for storage or return shipment of the equipment.
5. For repairs or replacement of equipment damaged during shipment, contact One Stop Systems, Inc. to obtain a Return
Materials Authorization (RMA) number and further shipping instructions.
PMC-Pn1
TC9021 Ethernet
Controllers
LEDs
RJ45 Connectors
PCI-PCI
Bridge
