NOTE:
The fourth (eth3) network card is reserved for High Availability mode by
default. Therefore, make sure you enable, but do not attach, the fourth
(eth3) network card to a network.
CAUTION:
Hyper-V offers two kinds of virtual Network Adapters (NICs):
Legacy and Synthetic. Due to a known issue (Hyper-V network
adapters are mapped to a different eth on every boot), using
Legacy and Synthetic NICs within the same configuration will
result in improper network setup. If you have to use more than
one NICs, we recommend using only Legacy NICs.
and download the latest One Identity Safeguard for
Privileged Sessions installation ISO file. Note that you need to have purchased SPS
as a virtual appliance or have partner access to download One Identity Safeguard for
Privileged Sessions ISO files. If you are a partner but do not see the ISO files, you
can request partner access within
3. Mount the ISO image and boot the virtual machine. Follow the on-screen instructions
to install SPS.
SPS 6.0 Installation Guide
One Identity Safeguard for Privileged Sessions Hyper-V Installation Guide
26
