5
Key Charts
When the
LED
(red light) blinks, the remote control is
working and (after programming) is sending signals.
Press
VCR/PVR
,
DVD
,
CBL/SAT
, or
TV
once to select a
desired home entertainment device to control.
Also see the
Device Table
on page 6.
Press
POWER
once to turn on or off the selected device.
For master power control, see
Programming
A Master Power Macro
on page 10.
Use the keypad (
1
~
9
and
0)
to directly select channels
(e.g.,
009
or
031
).
Use
TV/VID
to switch the TV’s input to view TV or video
programs.
Press
ENTER
once after entering the channel numbers on
some TVs.
Use
GUIDE
to display your selected device’s program
guide or setup menu.
Press
MENU
once to display your selected device’s main
menu.
Use
INFO
to display the current channel and program or
on-screen directory.
Use
EXIT
to exit from your selected device’s guide or
menu.
Use the
Cursor Keys
to move the cursor in the program
guide and menu screens.
Use
SELECT
(OK) to choose options from your selected
device’s menu or guide.
Press
LAST
once to recall the last channel.
Use
FAV
to scan all channels, or after programming,
to scan up to 10 favorite channels.
Use
CH
▲
(or
CH
▼
) to select the next higher (or lower)
channel.
Press
SUBTITLE/CC
once to display (or turn off) subtitles or
closed captions,if available on your DVD player or
cable/satellite service.
For a PVR (or DVR), press
PVR MENU
once to display a
list of your recorded shows.
Press
MUTE
once to turn the sound off or on.
Use
VOL
▲
(or
VOL
▼
) to raise (or lower) the sound vol-
ume.
URC4021 manual new IC:CTGAE4P 4021 manual booklet New IC 4/13/09 3:38 PM Page 5
