![One for All OARI06G User Manual Download Page 18](http://html1.mh-extra.com/html/one-for-all/oari06g/oari06g_user-manual_1634760018.webp)
18
-ACROS
The One For All SmartControl remote can condense multi-
step activities to a single keypress. These are called “macros”.
&OREXAMPLEYOUCOULDMAKETHE
ONDEMAND
key perform
a series of steps when you’re finished watching a DVD: (1)
stop the DVD, (2) turn the DVD player off, and (3) turn your
TV off.
Note:
A macro can contain up to 15 steps.
4OSETUPA-ACRO
1.
Press and hold the
SETUP
key until the blue ring flashes
twice.
2.
Press
9 9 5
. The blue ring flashes twice.
3.
0RESSTHEKEYYOUWANTTOUSETOEXECUTETHEMACRO
&OREXAMPLEIFYOUWANTTHE
ONDEMAND
key to trigger
the steps to stop a DVD, turn the DVD player off, and
turn off the TV, press the
ONDEMAND
key in this step.
4.
Use the device select keys to highlight the device mode
for the first step in the macro.
&OREXAMPLEIFTHElRSTSTEPISTOSTOPA$6$HIGHLIGHT
DVD
.
5.
Press the key for the first command in the sequence.
&OREXAMPLEIFTHElRSTSTEPISTOSTOPA$6$PRESSTHE
(stop) key.
6.
If there are more commands for this device, press the
KEYSFORTHENEXTCOMMANDS)FTHEREARENTGOTOSTEP
7.)
&OREXAMPLEIFYOUWANTTOTURNTHE$6$PLAYEROFFAFTER
you stop the disc, press the key.
When you’re finished with commands for this device, go
to step 7.
7.
Use the device select keys to highlight the device mode
FORTHENEXTDEVICEYOUWANTTOUSEINTHEMACRO
&OREXAMPLEIFTHENEXTSTEPINTHEMACROISTOTURNOFF
the TV, highlight
TV
.
8.
0RESSTHEKEYFORTHENEXTCOMMANDINTHESEQUENCE
&OREXAMPLEIFTHENEXTSTEPISTOTURNOFFTHE46PRESS
the key.
9.
If there are more commands for this device, press the
KEYSFORTHENEXTCOMMANDS
If you’re finished with this macro, go to step 10.
If you want to use another device in this activity, repeat
steps 7 and 8.
10.
Press and hold the
SETUP
key until the blue ring flashes
twice.
Congratulations! You have successfully programmed a macro.
Now when you press the key you designated as this macro
key, the remote will send the steps you programmed.
4OUSEAMACRO
1.
Make sure the remote is pointed at the devices this
macro uses.
2.
Press the key you designated for the macro.
Leave the remote pointed at the devices for several
seconds. The macro may take a few seconds to finish.