The default Set Top Box protocol may be programmed in the field using
the following procedure:
• Press the <Home> key, <REC> key and <OK> key simultanously for
3 sec, STB indicator LED will give a conformation blink and remain on.
• Release the keys and press a <Digit> key to select the Default Protocol.
Refer to the table below for the protocol selection.
• The LED will blink, indicating that the Default STB Protocol has been
programmed; the number of blinks corresponds to the Protocol
number selected, i.e. 1 blink for Protocol 1, 2 blinks for Protocol 2, etc.
Sr. No.
SW Keys
STB Model
LED Confirmation
1
Digit2
Humax (eVision logo)
Two blinks
2
Digit4
Airties
Four
blinks
3
Digit5
Kaon (Etisalat logo)
Five blinks
4
Digit6
Kaon (eVision logo)
Six blinks
5
Digit7
Huawei
Seven
blinks
6
Digit8
Pace
Eight
blinks
7
Digit9
Humax (Etisalat logo)
Nine blinks
3
Universal Remote Control Programming
for Etisalat Set Top Boxes