FUSE HOLDER
27
Dual Mode IntelliPlug AVC014
SECTION
Table of Contents
1
2
3
4
My One Click IntelliPlug unit does not work anymore.
.
• Disconnect all devices from the One Click IntelliPlug
unit and unplug the unit from the wall socket.
Plug the One Click IntelliPlug into the wall socket and
check the Slave LED to see that it’s green. If the LED
is green, then reconnect the devices to the unit.
• If the LED is not green, then try another power socket.
• Check the 13 amp fuse, replace if necessary
5
FREQUENTLY ASKED QUESTIONS - DESKTOP / LAPTOP CONFIGURATION
What do the LEDs indicate in Desktop / Laptop Configuration?
Operational Mode LED will illuminate GREEN when the Intelliplug is recieving power from the mains.
Once power is switched to peripheral equipment the Slave Status will illuminate GREEN.
During the shutdown process the Slave Status LED will flash GREEN then go off.
None of the LEDs are working on my One Click Intelliplug.
Ensure that the wall socket is set to the ON position.
