Onan MDKBH Series, Service Manual

Page: 11 / 90

1-2
EMISSIONS LABEL
The engine has a label on the air intake (Figure 1-2)
which states compliance with applicable EPA and
California emissions regulations.
California users of this genset should be aware that
unauthorized modifications or replacement of fuel,
exhaust, air intake, or speed control system compo-
nents that affect engine emissions are prohibited.
Unauthorized modification, removal or replacement
of the engine label is prohibited.
You should carefully review Operator (Owner),
Installation and other manuals and information you
received with your genset. If you are unsure that the
installation, use, maintenance or service of your
genset is authorized, you should seek assistance
from an approved Onan dealer.
California genset users may use Table 1-1 as an aid
in locating information about the California Air Re-
sources Board requirements for emissions control.
ENGINE
EMISSIONS
LABEL
FIGURE 1-2. EMISSIONS LABEL
TABLE 1-1. EMISSIONS CONTROL INFORMATION
Emissions Warranty Information The California emissions control warranty statement is located in the same packet of
information as this manual when the genset is shipped from the factory.
Engine Fuel Requirements
The engine is certified to operate on diesel fuel. See FUEL RECOMMENDATIONS
(p. 3-1).
Engine Lubricating Oil Require-
ments
See ENGINE OIL RECOMMENDATIONS (p. 3-1).
Engine Adjustments
High Idle Speed. This is a service procedure requiring trained personnel and proper
tools. See the Service Manual.
Engine Emission Control Sys-
tem
The engine emission control system consists of engine design and precision
manufacture. (IFI)
Redistribution or publication of this document,
by any means, is strictly prohibited.