ON Semiconductor NCN51205GEVB, User Manual

Page: 3 / 20

NCN51205GEVB
http://onsemi.com
3
ELECTRICAL SPECIFICATION
Recommend Operation Conditions
Operating ranges define the limits for functional
operation and parametric characteristics of the development
board. Note that the functionality of the development board
outside these operating ranges is not guaranteed. Operating
outside the recommended operating ranges for extended
periods of time may affect device reliability.
Table 2. OPERATING RANGES
Symbol Parameter Min Max Unit
V
BUS
Voltage on Positive Pin of J1 (Note 1) +20 +33 V
V
DIG1
Input Voltage on J4 and J3 (Pins 9, 11, 13 and 15) and J2 (Pin 8) 0 3.3 V
V
DIG2
Input Voltage on J3 (Pins 1, 3, 5 and 7) (Note 2) 0 5 V
V
DD1
Output Voltage on J2 (Pin 1) 0 3.3 V
V
DD2
Output Voltage on J3 (Pins 2, 4, 6 and 8) and J2 (Pins 3 and 7)
(Note 3)
3.3 21 V
V
20V
Output Voltage on J2 (Pin 5) 0 22 V
T
a
Ambient Temperature − 25 +85 ° C
1. Voltage indicates DC value. With equalization pulse bus voltage must be between 11 V and 45 V
2. Higher voltages are possible. See Adjustable DC − DC Converter page 15 for more details. Only valid if R12, R17, R22 and R25 are not
mounted.
3. See Adjustable DC − DC Converter page 15 for the limitations!
Table 3. DC PARAMETERS
(The DC parameters are given for a development board operating within the Recommended Operating Conditions unless otherwise
specified.)
Convention: currents flowing in the circuit are defined as positive.
Symbol
Con-
nector
Pin(s) Parameter
Remark/Test
Conditions
Min Typ Max Unit
Power Supply
V
BUS
J1 1 Bus DC Voltage Excluding Active and
Equalization Pulse
20 33 V
I
BUS
Bus Current Consumption Normal Operating Mode,
No External Load, DC1
and DC2 Enabled,
Continuous Transmission
of ‘0’ on the KNX Bus by
another KNX Device
5 mA
V
BUSH
Undervoltage Release Level V
BUS
Rising
(Figure NO TAG)
18.0 V
V
BUSL
Undervoltage Trigger Level V
BUS
Falling
(Figure NO TAG)
16.8 V
V
BUS_Hyst
Undervoltage Hysteresis 0.6 V
KNX Bus Coupler
I
coupler_lim
J1 1 Bus Coupler Current
Limitation
J5 open 13 30 mA
J5 shorted 26 60 mA
Fixed DC − DC Converter
V
DD1
J2 1
Output Voltage 3.13 3.3 3.47 V
V
DD1_rip
Output Voltage Ripple V
BUS
= 26 V, I
DD1
= 40 mA 40 mV
I
DD1_lim
Overcurrent Threshold − 100 − 200 mA
η
VDD1
Power Efficiency V
in
= 26 V, I
DD1
= 35 mA 90 %