ON Semiconductor DVK-AXM0F243-868-x-ANT-GEVB Series, User Manual

Page: 5 / 14

EVBUM2595/D
www.onsemi.com
5
Out of the Box RF Functionality
RF functionality are already programmed on both
mainboards. It’s possible to make the first RF experience
sending data packages from
DVK
− AXM0F243 − XXX − x − SMA − GEVB, programmed
as transmitter, to the
DVK
− AXM0F243 − XXX − x − ANT − GEVB, programmed
as receiver, just following these simply steps.
Preparing DVK − AXM0F243 − XXX − x − SMA − GEVB:
•
Screw the antenna to the
DVK − AXM0F243 − XXX − x −
SMA
− GEVB
board
•
Connect the DVK − AXM0F243 − XXX − x −
SMA
− GEVB
board to the AXDBG Debug adapter board with the
Flat Debug cable
•
Connect the AXDBG Debug adapter board to the PC
with Mini USB cable
•
DVK − AXM0F243 − XXX − x −
SMA
− GEVB LED is
blinking when transmitting data packages
Preparing DVK − AXM0F243 − XXX − x − ANT − GEVB:
•
Insert the LR4 cell batteries in
DVK − AXM0F243 − XXX − x − ANT − GEVB battery holder.
•
Set the DVK − AXM0F243 − XXX − x − ANT − GEVB
Power supply switch in position 1 for battery powered
operation. Position 2 is for debug link connector
powered operation.
Figure 5. Power Supply Switch. Position 1 −
Battery Powered Operation, Position 2 − Debug
Link Connector Powered Operation
•
DVK − AXM0F243 − XXX − x − ANT − GEVB LED is
blinking when receiving data packages from
DVK
− AXM0F243 − XXX − x − SMA − GEVB
See Figure 6: DVK − AXM0F243 − xxx − x − SMA − GEVB
connection for more details.
Figure 6. DVK − AXM0F243 − xxx − x − SMA − GEVB Connection
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.