EVBUM2595/D
www.onsemi.com
12
UART Communication
Debug link data are transmitted and received on the PC via
UART communication. Any serial terminal software is
suitable utilizing the following settings:
•
baud rate 9600 bit/s
•
data bits 8
•
stop bit 1
•
parity none
The actual active COM port number is visible in the
Control Panel
−
> Device Manager console under Ports
(COM & LPT).
Figure 17. Device Manager
Typical received data are for example packages data,
RSSI, frequency offset values
Figure 18. Terminal Software Received Data
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
